Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the central display of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Onboard computer

See other generations:
Video tutorial

If the central display of the infotainment system in your Peugeot 308 has stopped working and you want to find out how to safely remove it, all you need to do is read the following guide carefully and follow the described procedure. First, get two screwdrivers: one with a flat head and one with a cross head.

Then go inside the cabin and use the flat head screwdriver to remove both air vents located on the sides of the display. Once you have done that, unscrew the screws with a cross head screwdriver and pull the display towards you. Finally, disconnect the electrical cables.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

How do you turn off the central display of the Peugeot 308?
How do you turn off the central display of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to turn off the central display of the Peugeot 308, you need to insert the ignition key into the slot, so that the dashboard turns on: at th…
How to Remove the Centre Console on the Peugeot 308
How to Remove the Centre Console on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today's guide shows how to remove the centre console on the Peugeot 308, following the instructions below. First, get inside the vehicle and start by…
How do you disassemble the key of the Peugeot 308?
How do you disassemble the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) The key, which is part of the remote control, of the Peugeot 308 and not only, is made, as can be seen from the images of the video here, just to get…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos