Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the speaker of the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Speaker

Video tutorial

In the following article, we will see how to replace the speaker located in the door of the Peugeot 207. For this operation, a Torx T20 key and a flathead screwdriver will be necessary. To replace the speaker, first unscrew the Torx T20 screw located in the door compartment, after removing it, remove the screw on the side of the door as shown in the video tutorial below the article.

Once the second screw is also removed, remove the compartment door, along with the control panel. After removing it, disconnect the connector located underneath.

Once completely removed, remove the door panel by applying pressure on the sides, using a flathead screwdriver to pry it off, being careful not to damage the car. Once the door panel is removed, you will have access to the speaker. Remove the speaker fixing screws to remove it and disconnect the connectors, then remove the speaker and replace it. Now reconnect it, put it back in its place, and reassemble all the parts previously removed.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the rear door panel to install the speaker on the Peugeot 207. First, open the rear …
Peugeot 207 (2006-2015 / MK 1) In this tutorial, you will see how to replace the front speakers in the Peugeot 207, a very simple and quick operation. First, ensure the dashboard i…
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos