Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers in the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Speaker

In this tutorial, you will see how to replace the front speakers in the Peugeot 207, a very simple and quick operation. First, ensure the dashboard is off for safety, then open the door where you will be working and unscrew all the indicated screws using a Torx key. Next, separate the panel from the door, disconnect both the window switch console and the lock cable, and proceed to remove the old speaker. At this point, simply install the replacement and reassemble everything by following the reverse procedure.

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the driver's seat in the Peugeot 207?
How do you remove the driver's seat in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) The motivation for which it was decided, in this video, to remove the driver's seat, is to check the conditions of the vehicle's floor carpet, one of…
How to disassemble and replace the front suspensions of the Peugeot 207
How to disassemble and replace the front suspensions of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Below we will discover the main steps on how to disassemble and replace the front suspensions of the Peugeot 207. First, we lift the car and remove t…
Replacing Front Brake Pads on Peugeot 207
Replacing Front Brake Pads on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to replace the front brake pads on a Peugeot 207. First, lift the vehicle and remove the front wheel by un…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos