Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Panel of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

In this video tutorial, you will learn how to remove and replace the rear door panel to install the speaker on the Peugeot 207. First, open the rear door and start unscrewing the three fastening screws located on the grab handle and on the sides of the door panel; then, pry off the sides to detach and remove it, disconnecting the handle cable as shown in the video. At this point, install the new speaker by connecting the electrical wiring, and finally refit the rear door panel!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …
How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos