|
Do it yourself
| |||
| ||||
How to replace the air filter of the Peugeot 2008
Model: Peugeot 2008
MK 1
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Replacing the air filter on a Peugeot 2008 car is a simple and quick operation that can be done independently. The air filter is located inside the front hood, so we begin the replacement procedure by opening the hood. By pushing on the two support tabs, we disconnect the air intake duct. Using a flat-head screwdriver, we push on the yellow part of the manifold to remove it. Using the same screwdriver, we loosen the support ring that holds the air box. We tilt the box upwards to remove it. Using a Phillips screwdriver, we unscrew the six screws on the flange to remove it. Once the box is open, we remove the filter and insert the new one, closing the cover and tilting it inside the hood to insert the box. We tighten the support ring and connect the connector. We insert the air intake duct and close the front hood.
Posted on 19 April 2025 by ScegliAuto
Related tutorials
Peugeot 2008
(2013-2019 /
MK 1)
To replace the air filter on a Peugeot 2008 model 1, you need to: - open the front bonnet; - cover the external bodywork with a cloth; - disconnect t…
Peugeot 2008
(2019-2026 /
MK 2)
Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …
Peugeot 2008
(2013-2019 /
MK 1)
Replacing the cabin air filter or pollen filter on a Peugeot 2008 mk1 is easier than ever. Thanks to our video guide, you can replace the filter inde…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
