|
Do it yourself
| |||
| ||||
How do you remove the rearview mirror of the Peugeot 2008?
Model: Peugeot 2008
MK 1
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
The video tutorial published does not only refer to the Peugeot 2008, but to any type of vehicle, car, heavy vehicle, etc. If there is a need to disassemble only the reflective part, or the entire structure of the mirror, you can resort to the technique shown here, in fact with a simple suction cup and in a few seconds the work is completed. It is a matter of placing the aforementioned suction cup on the mirror, pressing it and then pulling it outwards. Once this is done, if desired, continue with the disassembly of the rear shell, the fasteners, the electrical cables, if it is an electric mirror, and so on.
Posted on 25 May 2025 by ScegliAuto
Related tutorials
Peugeot 2008
(2013-2019 /
MK 1)
To remove the mirror from the external mirror on a Peugeot 2008, use a plastic or rubber-coated lever to pry between the perimeter of the mirror fram…
Peugeot 2008
(2013-2019 /
MK 1)
The procedure for removing and replacing the external wing mirror is very simple; here’s how to do it on the Peugeot 2008. First, open the front door…
Peugeot 2008
(2013-2019 /
MK 1)
In this brief guide, we will see step-by-step instructions on how to remove and replace the ambient temperature sensor located on the right-hand rear…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel from the Citroen C4 Picasso
Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |