Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the clutch cable of the Peugeot 206 1.4 HDi

Model: Peugeot 206 MK 1 - Years 1998-2012

The following steps will show us how to disassemble and replace the clutch cable of the Peugeot 206 1.4 HDi. First, we open the hood of the car and start by disassembling and removing the battery, disconnecting both terminals (positive and negative); we unscrew the screw of the battery bracket to remove it, then also remove the battery holder, as shown in the video. At this point, we remove the metal plate that we find underneath, lifting the car to complete the removal of the clutch cable; we replace it with the new one, correctly adjusting the cable.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Peugeot 206
Replacing the Clutch Cable on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide will show you how to remove and replace the clutch cable on the Peugeot 206 in simple, quick steps. First, open the bonnet and begin by re…
How to disassemble and replace the clutch cable of the Peugeot 206
How to disassemble and replace the clutch cable of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Peugeot 206, in simple steps. First, op…
Removing the Clutch Cable of the Peugeot 206 1.4
Removing the Clutch Cable of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and be…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos