Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Clutch Cable of the Peugeot 206 1.4

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Clutch

Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and begin to disassemble and remove the battery and battery tray, disconnecting both terminals. Next, disconnect the clutch cable from the adjuster located at the bottom, as shown in the video. At this point, disconnect the clutch cable from the pedal, removing the cable sheath from the engine compartment; replace it with the new original one, reassembling and adjusting it correctly, and finally reassemble the battery.

Posted on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Peugeot 206
Replacing the Clutch Cable on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide will show you how to remove and replace the clutch cable on the Peugeot 206 in simple, quick steps. First, open the bonnet and begin by re…
How to disassemble and replace the clutch cable of the Peugeot 206
How to disassemble and replace the clutch cable of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Peugeot 206, in simple steps. First, op…
Replacement of the clutch cable of the Peugeot 206 1.4 HDi
Replacement of the clutch cable of the Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) The following steps will show us how to disassemble and replace the clutch cable of the Peugeot 206 1.4 HDi. First, we open the hood of the car and s…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos