Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the clutch cable of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012

Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Peugeot 206, in simple steps. First, open the car's engine hood and start by disassembling and removing the battery and battery holder, disconnecting both terminals (positive and negative); we find the clutch cable underneath, where we will disconnect the adjuster and unscrew the nut to remove it (also releasing the cable on the clutch pedal), as shown in the video. At this point, we install the new clutch cable with the sheath, following the video tutorial until the end!

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Clutch Cable of the Peugeot 206 1.4
Removing the Clutch Cable of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and be…
How to Remove the Clutch Cable on a Peugeot 206
How to Remove the Clutch Cable on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide shows how to remove the clutch cable on a Peugeot 206. Lift the bonnet and secure it; remove the vehicle's battery. Undo the clutch cable …
How to replace the clutch cable on the Peugeot 206?
How to replace the clutch cable on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the clutch cable on the Peugeot 206, you need to remove the plastic panel located at the pedals, just below the steering column. Once this…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos