Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to remove the clutch cable on a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Clutch
Operation: How to remove the clutch cable on a Peugeot 206

Let's see in this video how to remove the clutch cable on a Peugeot 206. Lift the bonnet and put it in safety; we remove the battery from the vehicle power supply. We unscrew the pins of the clutch cable with a socket wrench. We begin to disassemble the clamping pins of the clutch cable (as in the video). Once the bolts have been unscrewed from their seat, we are going to remove them. We extract the clutch cable to the inside of the car. Once the cable has been removed, we assemble the new piece in the engine compartment. Finally we tighten the pins well and test the correct functioning of the clutch. We correct the tension of the same.


Posted on 19 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - How to remove the clutch cable in the Peugeot 206? Read Answer
    • 206 1998-2012 - How to replace the clutch cable in the Peugeot 206? Read Answer
    • 206 1998-2012 - How to replace the clutch cable on the Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos