Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Cable on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012

This guide will show you how to remove and replace the clutch cable on the Peugeot 206 in simple, quick steps. First, open the bonnet and begin by removing the battery; disconnect both battery terminals (positive and negative) and remove the bolt from the bracket at the bottom, as shown in the video. Next, remove the battery bracket to access the clutch cable; disconnect and remove it along with the entire sheath, then refit and adjust the new clutch cable!

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the clutch cable of the Peugeot 206
How to disassemble and replace the clutch cable of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Peugeot 206, in simple steps. First, op…
Removing the Clutch Cable of the Peugeot 206 1.4
Removing the Clutch Cable of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and be…
Replacement of the clutch cable of the Peugeot 206 1.4 HDi
Replacement of the clutch cable of the Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) The following steps will show us how to disassemble and replace the clutch cable of the Peugeot 206 1.4 HDi. First, we open the hood of the car and s…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos