Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt of the Peugeot 206 1.4 HDI

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: V-belt

Today's main instructions will show us how to disassemble and replace the serpentine belt of the Peugeot 206 1.4 HDI. First, we lift the vehicle and start disassembling and removing the front right wheel; then we loosen the tensioner with a wrench, loosening the screw of the tensioner with a torx T30 key, as shown in the video. At this point, we remove the service belt, replacing it with the new original one; we insert it in the correct direction and finally restore the position of the tensioner, following the video tutorial until the end!

Posted on 4 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator of the Peugeot 206 1.4 HDI
How to replace the alternator of the Peugeot 206 1.4 HDI
Peugeot 206 (1998-2012 / MK 1) Today's main steps will show us how to dismantle and replace the alternator of the Peugeot 206 1.4 HDI, following these simple instructions. First, w…
How to Replace the Serpentine Belt on a Peugeot 206?
How to Replace the Serpentine Belt on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the serpentine belt on a Peugeot 206, lift the car using a ramp. Pull the ribbed part of the tensioner pulley using the square drive of th…
How to change the serpentine belt on a Peugeot 206
How to change the serpentine belt on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, we can see how to change the service belt on a Peugeot 206: to do this operation, it will be necessary to lift the car using jacks, th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos