Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the fan from the heating system in the Peugeot 407?

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Blower motor

Video tutorial

When turning on the hot air in your car, in this case a Peugeot 407, and nothing happens, we are facing one of the following problems: blown fuse, shorted cables, or a blocked or burnt fan. Focusing on the last hypothesis, we must remove it, following the steps shown in the video: First, remove the carpet covering in the area under the glove compartment, then unscrew the locking pins of the fan, pull it out of its housing, and finally disconnect the power supply electrical connector.


Posted on 10 August 2025 by ScegliAuto


Related tutorials

Removing the Cabin Fan on Peugeot 407
Removing the Cabin Fan on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Here’s how to remove the heater radiator on a Peugeot 407. Remove the plastic cover from the centre tunnel (located under the centre tunnel on the le…
How to replace the cabin fan of the Peugeot 407
How to replace the cabin fan of the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Peugeot 407. First, we open the front door on th…
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Where is the Cabin Fan Fuse Located in a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) If the cabin fan in your Peugeot 407 has suddenly stopped working, first check the status of the respective fuse, the location of which is indicated …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos