Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on the Peugeot 307?

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

Video tutorial

In this tutorial, we can see how to replace the rear lights on the Peugeot 307, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the trunk door and remove the panel located on the back of the light in question.

Next, unscrew the plastic nut, disconnect the power connector, and unscrew the second nut located on the outer upper edge. At this point, all that remains is to grab the light, separate it from the bodywork, and install the replacement following the reverse procedure.


Posted on 19 August 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Lights on a Peugeot 307CC?
How to Replace the Rear Lights on a Peugeot 307CC?
Peugeot 307 (2001-2009 / MK 1) In this tutorial, see how to replace the rear lights on a Peugeot 307 CC, a very simple operation. Before proceeding, ensure the key is not inserted …
Guide to Removing the Rear Bumper of the Peugeot 307
Guide to Removing the Rear Bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this short and simple guide, learn how to remove and replace the rear bumper of the Peugeot 307, following the instructions below. First, move to …
Removing and Installing Rear Seats in Peugeot 307 SW
Removing and Installing Rear Seats in Peugeot 307 SW
Peugeot 307 (2001-2009 / MK 1) Today, in this tutorial, you will learn how to remove the rear seats in a Peugeot 307 and 307 SW. First, open the rear doors of the car and then remo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos