Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Rear Bumper of the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

Video tutorial

In this short and simple guide, learn how to remove and replace the rear bumper of the Peugeot 307, following the instructions below. First, move to the rear and open the boot; then unclip all the plastic clips located under the bumper and on both sides of the rear wheel arches, as shown in the video.

At this point, remove the rear lights by unscrewing the screws underneath; then gently unclip the rear bumper, starting from the sides, until it is completely removed!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on Peugeot 307
How to Remove the Rear Bumper on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, you will learn how to remove the rear bumper on a Peugeot 307, following the instructions below. First, open the boot and sta…
How to Remove the Rear Bumper from a Peugeot 307
How to Remove the Rear Bumper from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, you will learn how to remove and replace the rear bumper of a Peugeot 307 in simple and quick steps. First, open the boot lid…
How to remove the front bumper of the Peugeot 307
How to remove the front bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Removing the front bumper of your Peugeot 307 is simpler than you might think. First, turn off the car, then lift the bonnet and, using a 10 mm Torx …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos