Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Rear bumper

In this video tutorial, you will learn how to remove and replace the rear bumper of a Peugeot 307 in simple and quick steps. First, open the boot lid and start by removing the rear lights by unscrewing the screw inside and disconnecting the bulb's electrical connector. Next, unscrew the screws located at the top of the bumper and also remove those on both sides of the rear wheel arches, as shown in the video. At this point, detach the rear bumper from the sides until it is completely removed!

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Rear Bumper of the Peugeot 307
Guide to Removing the Rear Bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this short and simple guide, learn how to remove and replace the rear bumper of the Peugeot 307, following the instructions below. First, move to …
How to remove the front seat of the Peugeot 307
How to remove the front seat of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today we will explain how to remove the front bumper of the Peugeot 307. To perform this operation, we need to open the front hood and remove the pla…
How to Replace the Parking Sensors on a Peugeot 307 CC
How to Replace the Parking Sensors on a Peugeot 307 CC
Peugeot 307 (2001-2009 / MK 1) To replace the parking sensors on a Peugeot 307 CC, use a tool to lever off the trim at the bottom of the rear bumper. Once the trim is removed, you …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos