Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Sensors on a Peugeot 307 CC

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Parking sensors

To replace the parking sensors on a Peugeot 307 CC, use a tool to lever off the trim at the bottom of the rear bumper. Once the trim is removed, you can take out the individual sensors from their housings and disconnect them from their connectors. After all the old sensors have been disconnected, connect the new ones to the connectors and insert them back into the trim. Finally, refit the trim to the bumper, ensuring everything works correctly.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in the Peugeot 307?
Where Are the Fuses in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The fuses in the Peugeot 307 are divided between two dedicated fuse boxes installed in the vehicle: the first box is located inside the cabin, at the…
How to Replace the Reverse Light Bulb on a Peugeot 307
How to Replace the Reverse Light Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below is the procedure necessary to independently replace the reverse light bulb on your Peugeot 307. First, ensure you have a new reverse bulb that …
How to Replace the Gear Knob on a Peugeot 307
How to Replace the Gear Knob on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before starting, sit in the driver's seat of your Peugeot 307. Begin by unclipping and lifting the lower base of the gear lever gaiter. Next, grip th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos