Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to remove the glass washer pump on a Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Pump
Operation: How to remove the glass washer pump on a Peugeot 307

How to disassemble the window washer pump on a Peugeot 307? Let's see carefully how to do it: loosen the pins of the rim, lift the car on a column or jack bridge and remove the wheel (for convenience), then with a screwdriver we go to unscrew the screws of the internal plastic wheel stone guard (right side front). Now we unscrew the clamping pins of the washer pump, remove the power supply clamps. We screw the new washer pump and reconnect the clamps, we tighten all the pins of the stone guard and the engine panel with the screwdriver. Finally we reassemble the circle with the respective pins.


Posted on 1 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - How to disassemble the power steering pump in the Peugeot 307? Read Answer
    • 307 2001-2009 - Where is the power steering pump on the Peugeot 307 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos