Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windscreen Washer Pump in a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Pump

If no liquid comes out of the nozzles when pressing the windscreen wiper control lever, the pump may be damaged. After ensuring it is not a simple issue with a fuse or blockage, proceed to replace the pump, which is clipped to the base of the washer fluid reservoir with a rubber seal. To carry out the replacement, lift the car on the passenger side and remove the wheel and the corresponding wheel arch liner to access the reservoir. At this point, disconnect the power plug and the hoses attached to the pump to remove it from the reservoir, then reverse the process to install the new one.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 (2001-2009 / MK 1) Learn how to remove the windscreen washer pump on a Peugeot 307. Lift the car with a jack and remove the front right wheel. Take off the splash guard…
Peugeot 307 (2001-2009 / MK 1) To replace the fuel pump of the Peugeot 307, loosen the screws securing the rear seat bench, completely removing it to access the components undernea…
Peugeot 307 (2001-2009 / MK 1) To replace the oil pump on a Peugeot 307, lift the car using a jack or ramp to access the components in the lower part of the engine bay. You will fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos