Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the turn signal bulb in the side mirrors on a PEUGEOT 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

It is a simpler procedure than it may seem, easily tackled in DIY mode. Fold the mirror to have more space to work, then use a thin screwdriver or a plastic lever to pry off the mirror cover.

Once done, you will see the turn signal module, unscrew the screws or release the fasteners holding it in place. Now disconnect the electrical connector, remove the old bulb and insert the new compatible one. Reassemble everything following the steps in reverse and check by turning on the turn signals to see if they work.

If they do not work, contact a trusted mechanic to complete the job.


Posted on 6 September 2025 by ScegliAuto


Related tutorials

Replacement of the turn signal light of the external rearview mirror of the Peugeot 208.
Replacement of the turn signal light of the external rearview mirror of the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) Shortly we will see the step-by-step instructions on how to disassemble and replace the turn signal bulb of the external rearview mirror of the Peuge…
How to Replace the Wing Mirror Cap on the Peugeot 208
How to Replace the Wing Mirror Cap on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) To replace the outer wing mirror cap on the Peugeot 208, detach the mirror glass by removing it from its housing. This will allow access to the screw…
How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos