Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the power battery in the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery

This kind of work is quite simple to carry out, but with the support of the video guide provided here, it certainly becomes even easier. Let's proceed: with the instrument panel off, open the engine hood and disconnect the black cable, the negative pole, then the red one, positive, remove the metal plates securing the battery to its base and extract it from its seat. Now apply the reverse process for the installation of the new battery, being careful to clean the cable terminals with sandpaper and applying grease to the two poles of the battery.

Posted on 20 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Power Battery on the Peugeot 2008?
How to Replace the Power Battery on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Especially in winter, pay attention to the signals produced by the power battery of your vehicle, such as difficulty starting the engine, as the 12-v…
How do you replace the power battery in the Peugeot 2008?
How do you replace the power battery in the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this case, we are dealing with one of the most well-known and widespread topics among drivers, namely changing the car battery. This intervention …
Removing the Battery from a Peugeot 2008
Removing the Battery from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Is the power battery on your Peugeot 2008 damaged? Here’s how to remove it. Open the car door and pull up the engine compartment release lever locate…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos