Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the armrest of the Peugeot Expert

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

These short and simple instructions will show us the process of disassembly and replacement of the driver's seat armrest of the Peugeot Expert. First, we get on board the vehicle and start by rotating the armrest backwards, in order to put it in the release position; then we pull the armrest outwards with force, until it detaches and can be removed, as shown in the video.

At this point, if necessary, we also remove the armrest support bracket by removing the seat covering; we then proceed to install the new armrest, following the reverse process!


Posted on 25 October 2025 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Peugeot Expert.
How to replace the engine air filter of the Peugeot Expert.
Peugeot Expert (2016-2025 / Mark3, MK 3) In the following guide, you will find a description of the procedure you need to follow in order to independently replace the engine air filter of yo…
How to replace the front headlight bulb of the 2014 Peugeot Expert
How to replace the front headlight bulb of the 2014 Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Replacing the headlight bulb of the 2014 Peugeot Expert is a simple and quick operation to be carried out independently. To perform the replacement, …
How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos