Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear seat of the Peugeot 3008?

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Seat

See other generations:
Video tutorial

The need for more loading space in your car should not create problems, especially if the car in question is a Peugeot 3008 like the one shown in the video tutorial available here. Folding down the rear seats is a matter of seconds, just pull the two side handles and release the backrests, so you have a single loading floor.

If you prefer to completely remove the structure from the trunk, you will have to unscrew the locking pins located on the base, both at the front and rear. Even for this second solution, it is an easy job to do.


Posted on 7 April 2026 by ScegliAuto


Related tutorials

How to Install the Isofix Support on the Centre Seat of the Rear Bench of the Peugeot 3008
How to Install the Isofix Support on the Centre Seat of the Rear Bench of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In this video, see how to install the Isofix support in the centre seat of the rear bench of the Peugeot 3008: you can find the part on Amazon with c…
How to replace the fuel filter on the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the fuel filter on the Peugeot 3008, loosen the screws securing the rear passenger seat on the right side. Once the screws are loosened, y…
How to Remove the Rear Light of a Peugeot 3008?
How to Remove the Rear Light of a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) Before you begin, open the tailgate of your Peugeot 3008. Start by prising off and removing the cover of the rear light fixing screws, using a thin b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos