Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Gear Knob and Leather Gaiter on Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shifter boot

Video tutorial

Do you want to replace the gear knob along with the leather gaiter on a Peugeot 207? Here’s how to proceed with the replacement: First, use a plastic lever to detach the frame of the leather gaiter, then take the knob in your hands and twist it left and right until you remove it from the gear stick (cut the plastic tie). For installation: fit the new leather gaiter with the clips (if removed), then take the new knob and slide it onto the stick in the centre console until it is secured.

Finally, test the movement of the stick in the centre console to ensure the knob is correctly fitted.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob from a Peugeot 207
How to Remove the Gear Knob from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the gear knob from a Peugeot 207? Here's how to proceed: take the knob in your hands and rotate it left and right until you can remove …
Replacing the gear knob on a Peugeot 207
Replacing the gear knob on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the gear knob on a Peugeot 207, following the instructions below. First, get into th…
How to Remove the Gear Knob of a Peugeot 207
How to Remove the Gear Knob of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before proceeding with the replacement of the gear knob in the Peugeot 207, ensure that your car is on a flat surface or on a ramp, allowing you to w…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos