Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Gear Knob of a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Transmission

Before proceeding with the replacement of the gear knob in the Peugeot 207, ensure that your car is on a flat surface or on a ramp, allowing you to work safely and stably. Once done, start by unlocking the base of the gaiter by pulling the perimeter part near the handbrake, then proceed to remove the entire base. Expose the gear lever and pull the knob upwards with force. This will remove the entire assembly. Install the new knob by reversing the steps described.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) Today we will see how to disassemble the door panel of a Peugeot 207. Let's start the disassembly procedure by taking a plastic lever to remove the p…
Peugeot 207 (2006-2015 / MK 1) The instructions in this guide will show us how to disassemble and replace the gear knob of the Peugeot 207, as well as other models from the manufac…
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the gear knob on a Peugeot 207, following the instructions below. First, get into th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos