Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace a pollen filter on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Cabin air filter
Operation: How to replace a pollen filter on Peugeot 3008

How to replace the pollen filter fitted in a Peugeot 3008? Let's see how to perform the disassembly: using a lever, remove the plastic placed under the central tunnel (right side) and with a screwdriver unscrew the filter holder cover. With a screwdriver or a metal lever, remove the plastics of the coating and the cap from the filter holder, then extract the worn filter from the passenger compartment. We insert a new cabin filter making it adhere well around the walls of the box. Finally we reassemble the filter box cap and tighten the screws. We check the correct assembly of the previously assembled pieces.


Posted on 8 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the Peugeot 3008 cabin air filter located? Read Answer
    • 3008 2016-2023 - Where is the cabin filter of a Peugeot 3008 located? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 antipoline filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos