Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the central locking of a Peugeot 207.

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

Video tutorial

Let's see how to reset the central locking of a Peugeot 207: this is necessary when the key physically opens the doors but no longer works remotely; it is therefore a synchronization process, not a new programming of a virgin key. Let's sit in the car with all the doors closed; insert the key into the ignition, turn on the ignition, and immediately press the lock button, holding it down for 10 seconds.

Turn off the ignition and release the button.

Remove the key from the ignition and test the remote. If it doesn't work, repeat the procedure, making sure to press the button immediately after turning on the ignition.


Posted on 9 December 2025 by ScegliAuto


Related tutorials

How to program the key of the Peugeot 207
How to program the key of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) On the Peugeot 207, the key configuration with remote control is carried out with the vehicle stationary and the ignition in the ON position (engine …
At which point of the Peugeot 207 do we find the fuses?
At which point of the Peugeot 207 do we find the fuses?
Peugeot 207 (2006-2015 / MK 1) The fuses, it is important to specify, will never be found scattered and installed in individual points, but rather inside fuse boxes. Let's specify,…
Description of the Internal Fuse Box on Peugeot 207
Description of the Internal Fuse Box on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Let's see where the internal fuse box of the Peugeot 207 is located, which is situated in the dashboard on the driver’s side. To access it, usually, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos