Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The problems of the anti-roll bar on the Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Anti-roll bar

This video highlights several issues with the anti-roll bar mounted on the Peugeot 206: the bar, as its name suggests, is designed to reduce body roll by counteracting centrifugal force in curves, limiting the tilt of the body. However, on the 206, it is mounted very low, close to the ground, exposing it to impacts from potholes or obstacles, which can cause deformation or breakage, especially on rough roads. Additionally, its placement makes inspection difficult without disassembling other components. The bushings that secure the bar to the frame tend to wear out quickly, generating a characteristic noise when driving over potholes or bumps; furthermore, the original bushings are often of poor quality, while aftermarket options offer better quality but require modifications.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Injectors on Peugeot 206 1.4
Replacing Injectors on Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Are you experiencing issues with your vehicle? Want to remove the injectors from your Peugeot 206? Here’s how to do it. Lift the front bonnet and rem…
Removing the Temperature Sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Are you having issues with the temperature sensor? Here’s how to remove the temperature sensor on a Peugeot 206. Lift the front engine bonnet. Discon…
Where is the radiator fuse of the Peugeot 206 located?
Where is the radiator fuse of the Peugeot 206 located?
Peugeot 206 (1998-2012 / MK 1) When the Peugeot 206 has radiator issues, the first thing to check is the lack of water in the tank and the presence of any holes. If there are no pr…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos