Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stabiliser Bar Links on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Anti-roll bar

Video tutorial

In this video, let's see how to replace the stabiliser bar links on a Peugeot 207: loosen the bolts of the front wheels, lift the car, and remove the wheels. The links connect the stabiliser bar to the shock absorbers or lower arms.

They are identifiable by the two spherical joints at the ends, often covered by rubber. Apply some penetrating oil to the nuts if they are rusty, then use a 16mm spanner for the outer nut and a Torx 30 for the inner shaft.

Unscrew the lower nut and then the upper one. If the link is stuck, gently lift the hub and use a lever to detach it carefully. Fit the new link into the lower housing and hand-tighten the nut. Then connect the upper part, tightening the nuts with a torque wrench to 40/50 Nm. To ensure it is secured correctly, gently shake the stabiliser bar, then refit the wheel.


Posted on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Peugeot 207
How to Replace the Front Headlamp Bulb on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlamp bulb on your Peugeot 207, follow these simple steps. First, park your Peugeot 207 on a flat surface…
Where is the OBD2 port located on the Peugeot 207?
Where is the OBD2 port located on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To find the OBD2 port inside your Peugeot 207, all you have to do is carefully read and follow the steps described below. First, open the driver's si…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos