Removing the Anti-Roll Bar

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Anti-roll bar

Lift the car with suitable jacks and secure it with appropriate supports to prevent it from falling. Remove the wheel and to access the bar, it is necessary to remove the various components of the rear wheel arm. Start by removing the brake drum using the appropriate extractor. Once the drum is removed, unscrew the retaining bolts of the brake assembly. If the bolts are seized, use a penetrating spray. Remove the brake oil pipe and move the shoe assembly sideways for better access. Unscrew the retaining bolts and screws. Place a jack under the arm and lift it to relieve the tension on the torsion bar.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!

by ScegliAuto

Removing the Anti-Roll Bar

Related tutorials

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

More videos