Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Complete Shock Absorber with Hub

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Shocks

Video tutorial

Lift the vehicle on a hoist and remove the front wheel; then detach the tie rod end from the steering rack and the suspension arm; disconnect the drop link from its support on the shock absorber; free the grommets and the brake oil pipe; unscrew the central nut securing the driveshaft to the hub and pull it out of its seat; finally, access the engine bay and unscrew the fastening bolts of the shock absorber to its top mount: at this point, it is possible to remove the complete shock absorber with the hub, disc, and brake caliper.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Peugeot 206 (1998-2012 / MK 1) The cabin air filter is located in the engine bay, on the passenger side, just below the windscreen, behind the strut dome: directly in line with the…
Replacing the Cabin Air Filter
Peugeot 206 (1998-2012 / MK 1) The cabin air filter is located just below the windscreen, on the passenger side, behind the strut dome; access the filter housing and remove it, cle…
How to Change the Pollen Filter on a Peugeot 206
How to Change the Pollen Filter on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide shows how to replace the pollen filter on a Peugeot 206. The first step is to open the bonnet. On the left side of the compartment, in the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos