Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Cabin air filter replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located in the engine compartment, on the passenger side, immediately under the windscreen, behind the shock absorber dome: it is possible to intercept the seat of the passenger compartment air filter in correspondence with the wiper blade; then extract the old filter, eliminate any residual dirt and insert the new filter respecting the air direction and housing it correctly in its seat. When replacing the passenger compartment air filter, it is also advisable to sanitize the passenger compartment using a special germicidal spray following the relative instructions.


Posted on 16 August 2023 by ScegliAuto



Replacement of cabin air filter
Peugeot 206 (1998-2012 / MK 1) The cabin air filter is located just below the windshield, on the passenger side, behind the shock absorber dome. To access the filter compartment, r
Replacement of cabin diesel air filters
Peugeot 206 (1998-2012 / MK 1) Once the hood has been opened, remove the plastic cover on the engine and unscrew the fixing screws of the cover of the engine air filter container,
How to replace the air conditioner pollen filter.
Peugeot 206 (1998-2012 / MK 1) Open the engine compartment hood. Identify the position of the cabin air filter housing which, in this case, is located in the upper left part of the

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos