Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Engine Air Filter, Cabin Air Filter, and Fuel Filter

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Air filter

The engine air filter housing is located at the front right of the engine compartment (when viewed from the front), just behind the headlamp: to replace the filter, unscrew the fixing screws of the cover, remove the old filter, and insert the new one. Next, move on to replacing the cabin air filter, which is also in the engine compartment, just below the windscreen, on the passenger side, behind the shock absorber support: remove the old filter and insert the new one, ensuring the airflow direction is respected. Finally, the fuel filter is located at the front of the engine, behind the radiator: place a container under the drain screw and remove it until the filter is empty; then disconnect the fuel inlet and outlet pipes and unscrew the cap to extract the filter cartridge; insert the new filter and replace the o-ring seals included in the kit. Refit the cap, the pipes, and the drain screw. To avoid air entering the fuel system, slightly unscrew the drain screw and start the engine for 5-10 seconds, possibly several times, until fuel begins to flow from the screw, which can then be re-tightened.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Once the bonnet is open, remove the plastic cover on the engine and unscrew the fixing screws of the engine air filter housing cover. Lift it and ext…
Peugeot 206 (1998-2012 / MK 1) The cabin air filter is located in the engine bay, on the passenger side, just below the windscreen, behind the strut dome: directly in line with the…
Peugeot 206 (1998-2012 / MK 1) How do you replace the diesel filter on a Peugeot 206? Lift the cover of the engine compartment and see how to proceed. Remove the engine cover panel…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos