Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Wiper Blade Replacement

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Windshield wipers

Replacing the windscreen wiper blades is an extremely simple task: first, lift the control arm, rotate the blade 90° so it is perpendicular to the arm, unclip the fastening tab of the blade from the arm, and pull down to remove it; to fit the new blade, proceed in reverse: insert the blade into the control arm until it reaches the fitting area, align the fastening hook with the slot on the arm, and press until it clicks into place. Note that generally, the two blades are of different lengths.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windscreen Wiper Pump on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Is the wiper pump damaged? Here’s how to remove it on a 206. Use a socket spanner to unscrew the bolts located on the side of the wheel arch and the …
How to replace the windshield wiper blades of the Peugeot 206
How to replace the windshield wiper blades of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the windshield wiper blades on a Peugeot 206 1 vehicle is a simple and quick operation that can be done independently. First, we need to tu…
How to replace the wiper blades of the Peugeot 206
How to replace the wiper blades of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The steps to replace the windshield wiper blades of the Peugeot 206 are as follows: The first step is to lift the wiper arm and position it verticall…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos