Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the daytime running light of the front headlight of the Peugeot 5008.

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the daytime running light of the front headlight of the Peugeot 5008. First, let's open the hood of the vehicle and start by removing the plastic protective cap of the bulbs; then we remove the socket of the position light along with the bulb, as shown in the video.

At this point, we install the new daytime bulb of the correct type and with the same fitting; we reassemble the socket onto the optic group, checking the operation of the bulb, and if necessary, replacing the other lights of the front headlight as well!


Posted on 17 December 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on the Peugeot 5008
Replacing the Front Headlight Bulb on the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Today, we will go through the instructions to remove and replace the dipped or main beam bulb of the front headlight on the Peugeot 5008. First, open…
How to Replace the Front Headlamp Bulb on a Peugeot 5008
How to Replace the Front Headlamp Bulb on a Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Let's see the procedure for removing and replacing the front headlamp bulb on a Peugeot 5008, as well as the 3008. First, open the bonnet of the vehi…
How to replace the headlight bulb of the Peugeot 5008
How to replace the headlight bulb of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Today we will explain how to replace the front headlight bulb of the 2016 Peugeot 5008. This operation can be done independently by following the ins…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos