Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on a Peugeot 2008 MK1.

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

In this video, we will see how to replace the air filter on a Peugeot 2008 MK1: let's start by opening the front hood of the vehicle, and we can see that the air filter is located between the engine block and the starter battery. We will need to remove the air duct, which is located in front, and then disconnect the electrical connector, which is positioned above the filter box. Below the connector, we will find a screw that holds a clamp together.

Let's open it and remove the airbox, from which we will take off the cover by unscrewing the six cross-head screws located on the sides; these screws should not be completely removed, only unscrewed. We open the cover and take out the dirty filter.

We clean the container thoroughly of dust and debris, and then place the new clean filter back in, making sure to pay attention to the installation direction. Then we put the cover back on and reposition the airbox, reconnecting the connector and tightening the clamp.

We put the supply hose back in place, and we have finished our work.


Posted on 5 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the Peugeot 2008
How to Replace the Cabin Air Filter on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Replacing the cabin air filter or pollen filter on a Peugeot 2008 mk1 is easier than ever. Thanks to our video guide, you can replace the filter inde…
How to change the air filter of the Peugeot 2008 2014
How to change the air filter of the Peugeot 2008 2014
Peugeot 2008 (2013-2019 / MK 1) If you own a Peugeot 2008 (year 2014) and want to learn how to replace the engine air filter, all you need to do is follow the steps outlined in the …
How to Change the Cabin Air Filter on a Peugeot 2008
How to Change the Cabin Air Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To complete the replacement of the cabin air filter on your first generation Peugeot 2008, simply follow the steps described in this guide. Before yo…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos