Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the electric heater resistance in a Peugeot 3008?

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: A/C system

See other generations:
Video tutorial

To disassemble the heating system's resistor of the Peugeot 3008, we will need to focus on a specific point in the vehicle's cabin, namely behind the glove compartment on the passenger side. After removing the carpet covering the entire area where we will be working, we will first disconnect the power supply cables, then we will remove the locking pins, take it out, and finally install the new one. It is advisable and prudent to perform a functionality test before reassembling everything, to ensure that everything is okay.


Posted on 8 January 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Below are the instructions that will allow you to activate and deactivate the electric handbrake on a Peugeot 3008. When the vehicle is turned off, t…
Replacing the Electric Handbrake Button on a Peugeot 3008
Replacing the Electric Handbrake Button on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replace the electric parking brake button on a Peugeot 3008. Position the gear knob vertically, then use a plastic spatula to remove the trim above t…
How to enable manual opening on a Peugeot 3008
How to enable manual opening on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) To manually open and close the rear hatch of a Peugeot 3008 from outside, first remove the electric opening feature. To do this, turn on the instrume…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos