Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Electric Handbrake Button on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Push button

Replace the electric parking brake button on a Peugeot 3008. Position the gear knob vertically, then use a plastic spatula to remove the trim above the centre tunnel (gear lever surround). Next, use a screwdriver to unscrew the securing screws of the panel that includes the brake button (if screws are present), then remove the button as shown in the video. Disconnect the power connector of the button. Install the new brake button on the centre tunnel as removed previously. Test the correct operation of the new button on the 3008.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
How to Activate and Deactivate the Electric Handbrake on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Below are the instructions that will allow you to activate and deactivate the electric handbrake on a Peugeot 3008. When the vehicle is turned off, t…
How to install the handbrake on a Peugeot 3008
How to install the handbrake on a Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this video we see how to insert the electric handbrake on a Peugeot 3008. It is not a very easy operation: car off on "p" and with handbrake. We k…
How do you deactivate the electric handbrake on the Peugeot 3008?
How do you deactivate the electric handbrake on the Peugeot 3008?
Peugeot 3008 (2023-2026 / P64) In this video we can see how to deactivate the electric handbrake on a Peugeot 3008: we know well that on cars with this type of brake, as soon as th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos