Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Hydraulic Fluid Level on a Peugeot 207cc

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

In this video, you can see how to check the hydraulic fluid level located in the pump that operates the roof of the Peugeot 207cc. If you experience a fault with the roof of your convertible vehicle, it is advisable to first check the hydraulic fluid level, as a low level may indicate a leak in the roof system, which could slow down the operation of the folding hardtop or prevent it from fully opening or closing. To check the fluid level, lift the boot carpet, set aside the spare wheel, and you will see the pump in the housing; then remove the cover, lift it up, and check the level mark on the side.

Posted on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in the Peugeot 207 1.6
How to Replace the Coolant in the Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Let’s briefly review the steps to replace the coolant in the Peugeot 207 with a 1.6 petrol engine. First, drain the coolant by disconnecting the hose…
How to Change the Engine Oil and Filter on a Peugeot 207
How to Change the Engine Oil and Filter on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To replace the engine oil and filter on a Peugeot 207, start the engine for a few minutes to make the oil more fluid, then turn off the vehicle and l…
Replacing Front Brake Pads on Peugeot 207
Replacing Front Brake Pads on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to replace the front brake pads on a Peugeot 207. First, lift the vehicle and remove the front wheel by un…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos