Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Car stereo

Do you want to remove the radio from a Peugeot 508 and don't know how? Here’s how to take out the original stereo: Remove the screw covers from the stereo using a plastic lever (where the securing screws are located), and detach them from the centre console. Once the stereo is free from constraints, you can pull it away from the dashboard. Use a screwdriver to unscrew the securing screws located on the sides of the stereo (inner part); pull the stereo out with your hands and disconnect the cables (power and antenna). To reassemble, reverse the disassembly steps.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Thermostat on a Peugeot 508
Replacing the Thermostat on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Removing the thermostat on a Peugeot 508? Open and lift the front bonnet, remove the covering plastics. Unscrew the bolts on the thermostat hose cap …
Replacing Brake Pads on Peugeot 508
Replacing Brake Pads on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Are the rear brake pads on your Peugeot 508 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the d…
Replacing the Key Battery for the Peugeot 508
Replacing the Key Battery for the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos