Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service on Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Service warning light

Today we will see how to perform the service reset on a Peugeot RCZ, model produced from 2010 to 2015. Start the procedure by inserting the ignition key into the ignition switch, then press and hold the "CHECK/000" button on the speedometer and turn the ignition key to the first position to power the vehicle's injection system without starting the engine. After this, a ten-second timer will appear on the information display, so continue to hold the "CHECK/000" button until the time expires to perform the reset and complete the task, finally restart the vehicle.

Posted on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Peugeot RCZ 2012
How to reset the service indicator on the Peugeot RCZ 2012
Peugeot Rcz (2010-2015 / MK 1) If you own a 2012 Peugeot RCZ and are curious to discover how to correctly and quickly perform a manual reset of the service light, then all you have…
How to reset the service light on the Peugeot RCZ
How to reset the service light on the Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) In this video, you will see how to reset the service light on a Peugeot RCZ: of course, you should have completed the required services first. Start …
How to disassemble the Peugeot RCZ car radio
How to disassemble the Peugeot RCZ car radio
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by you…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos