Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Rcz
    4. : How to replace the remote control battery of the Peugeot RCZ?

Peugeot Rcz - Video tutorial

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Key
Operation: How to replace the remote control battery of the Peugeot RCZ?

The remote control of the Peugeot RCZ is similar to many others from Peugeot, so this procedure is also applicable to other models. The battery contained inside the remote control is of the CR1620 type, a classic button battery costing just a few cents. To carry out the procedure you need a flat-blade screwdriver: let's get it before starting. First, we snap the blade and then turn the key to locate the small slit located at the bottom, right at the bottom. Let's insert the screwdriver and leverage to move the two parts of the remote control apart. We open and, with the same screwdriver, remove the chip without touching the circuits. We remove the battery, replace it with the new one and reassemble everything.


Posted on 14 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos