Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Battery

The instructions in this video will show us the procedure for disassembling and replacing the battery of the Peugeot RCZ. First, we open the hood of the car and start removing the plastic cover located on the top; we move away the upper wiring and disconnect the electrical connector found at the bottom. At this point, we disconnect both battery terminals (positive and negative poles), finally unscrewing the bracket screw to remove it from its compartment; we replace it with the new one, of the correct type and with the same amperage, and reassemble everything!

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Peugeot RCZ?
How do you replace the battery of the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In order to replace the battery of the Peugeot RCZ, you need to open the hood so that you can access the components inside the engine compartment: on…
How do you replace the battery of the Peugeot RCZ?
How do you replace the battery of the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In order to replace the battery of the Peugeot RCZ, you need to open the hood so that you can access the components located inside the engine compart…
How do you set the clock on the Peugeot RCZ?
How do you set the clock on the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In order to set the clock of the Peugeot RCZ, you need to turn on the instrument panel by inserting the key into its ignition switch: once the panel …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos