Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Service warning light

In this video, you will see how to reset the service light on a Peugeot RCZ: of course, you should have completed the required services first. Start with the ignition off, and press the small button found on the left side of the speedometer. Keep it pressed while turning on the ignition (without starting the engine). This will activate a small timer, which will start a countdown from 10. When it reaches zero, you can release the button and turn off the ignition, then turn it back on to see that everything has been reset.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Peugeot RCZ 2012
How to reset the service indicator on the Peugeot RCZ 2012
Peugeot Rcz (2010-2015 / MK 1) If you own a 2012 Peugeot RCZ and are curious to discover how to correctly and quickly perform a manual reset of the service light, then all you have…
How to disassemble the Peugeot RCZ car radio
How to disassemble the Peugeot RCZ car radio
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by you…
Where is the OBD port of the Peugeot RCZ located?
Where is the OBD port of the Peugeot RCZ located?
Peugeot Rcz (2010-2015 / MK 1) To be able to independently locate the OBD port inside your Peugeot RCZ, it only takes a few seconds. All you have to do is carefully read the follow…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos