Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Peugeot 5008

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Service warning light

Below are the instructions on how to reset the service light for routine maintenance on the Peugeot 5008. First, get into the vehicle and press and hold the reset button located on the instrument panel; then turn on the ignition and wait for the countdown to finish that appears on the instrument display, as shown in the video. At this point, release the button and start the engine, checking that the warning and maintenance key have been reset from the instrument display.

Posted on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Peugeot 5008?
How to reset the "Service" light on a Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) To reset the "Service" light on a Peugeot 5008, follow these steps: First, make sure the vehicle is turned off. Then, press and hold the button on th…
How to Reset the Service Light on a Peugeot 5008
How to Reset the Service Light on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Resetting the service light on the Peugeot 5008 is very simple; let's see how to proceed in this tutorial. Of course, this procedure should only be c…
How to Reset the Service Light on a Peugeot 5008
How to Reset the Service Light on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) To reset the Service light on a Peugeot 5008, press and hold the SET button, which has a spanner icon next to it. While holding the button, turn the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos