Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb in the Ceiling Light of a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Interior dome light bulb

Video tutorial

Let's see how to replace the flat bulb in the ceiling light of a Peugeot 207: use a screwdriver to pry between the ceiling light and the headlining panel (without breaking anything), pull the ceiling light out from the panel and disconnect the power connector.

Replace the damaged bulb with a new one (same size and voltage).

Refit the ceiling light into its housing (push the transparent plastic with your hands until the clips lock into the side plastic). Test the correct operation of the ceiling light after replacing the bulb.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulb of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief and simple guide, follow the steps to remove and replace the interior light bulb of the Peugeot 307. First, get inside the vehicle and …
How to Replace the Headlamp Bulb on a Peugeot 307
How to Replace the Headlamp Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the left front headlamp bulb on a Peugeot 307, follow these steps: - open the front bonnet; - remove the light unit by turning it anti-clo…
How to replace the rear turn signal bulb on the Peugeot 307
How to replace the rear turn signal bulb on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The following steps will show us how to disassemble and replace the rear turn signal bulb of the Peugeot 307. First, open the rear hatch of the trunk…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos