Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna and Mount on the Roof of a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antenna

Video tutorial

Is the radio antenna on your car no longer working? In this guide, learn how to replace the antenna and mount on the roof of a Peugeot 307. Use a screwdriver to pry between the interior light and the headlining (without damaging the headlining), pull the interior light out from the panel and disconnect the power connector.

Unscrew the fastening nut of the antenna mount (remove the plastics if you want to replace the wiring).

Fit the new mount onto the roof of the car (screw the bolt in with the screwdriver until fully secured). Test the antenna for proper operation.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to replace the car radio antenna of the Peugeot 307
How to replace the car radio antenna of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the antenna of the Peugeot 307 car radio, in simple and quick s…
How to Replace the Headlining on a Peugeot 307 SW?
How to Replace the Headlining on a Peugeot 307 SW?
Peugeot 307 (2001-2009 / MK 1) To replace the headlining on a Peugeot 307 SW, remove the screws securing all components on the upper part of the roof: these include the sun visors,…
How to Reset the Sunroof of the Peugeot 307
How to Reset the Sunroof of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's article, you will learn how to reset/calibrate the sunroof of the Peugeot 307. The procedure requires no tools and takes less than 1 minut…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos