Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna from a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Antenna

To begin, know that the outer part of the antenna simply unscrews from the base. Get into the car and remove the interior light located in the roof. Remove the two round clips by turning them with a flat screwdriver: at this point, you will have access to the antenna cable and the bolt that secures the base, allowing you to unscrew it. Remove the panel with the antenna connector and then disconnect it. Take everything out and obviously proceed in reverse for the installation of the new antenna assembly, all the way to the outer antenna. Good luck!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the car radio antenna of the Peugeot 307
How to replace the car radio antenna of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the antenna of the Peugeot 307 car radio, in simple and quick s…
How to Replace the Antenna and Mount on the Roof of a Peugeot 307
How to Replace the Antenna and Mount on the Roof of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the radio antenna on your car no longer working? In this guide, learn how to replace the antenna and mount on the roof of a Peugeot 307. Use a scr…
Removing the Car Radio from a Peugeot 307
Removing the Car Radio from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, learn how to remove and replace the car radio in a Peugeot 307 (also applicable to other models from the French manufacturer) in simpl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos