Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Peugeot 504

Model: Peugeot Peugeot Various
Part: Engine oil

Here are the instructions to perform routine maintenance by changing the engine oil and oil filter on a Peugeot 504. First, lift the vehicle and begin draining the engine oil by unscrewing the drain bolt located on the sump, allowing it to drain into a container for about ten minutes. Next, replace the oil filter cartridge, accessing it from the engine bay as shown in the video. At this point, unscrew the filler cap and top up with new oil until reaching the maximum level.

Posted on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Peugeot 504
How to Replace the Rear Light Bulb on the Peugeot 504
Peugeot Peugeot Various Today, we will explain how to replace the left rear light bulb on the Peugeot 504. To remove the rear light, open the boot and detach the light from …
The 1.2 Puretech engine
The 1.2 Puretech engine
Peugeot Peugeot Various In this video we talk about the issues found on the Peugeot 1.2 Puretech engine, an engine that suffers from the destruction of the timing belt, imme…
How to solve the oil pressure problem on the 1.2 Pure Tech Peugeot engine
How to solve the oil pressure problem on the 1.2 Pure Tech Peugeot engine
Peugeot Peugeot Various A common problem that tends to occur frequently on Peugeot's 1.2 Pure Tech engines is oil pressure issues, which are indicated by the oil pressure wa…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos