Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Peugeot 504

Model: Peugeot Peugeot Various
Part: Tail light bulb

Video tutorial

Today, we will explain how to replace the left rear light bulb on the Peugeot 504. To remove the rear light, open the boot and detach the light from the inside by unscrewing the nut. After removing the light from its housing, disconnect the main connectors and replace the bulbs.

It is important to use bulbs with the same amperage and voltage.

After replacing the bulb, mount the light back in its housing and test its operation by turning on the vehicle's lights. If it does not work, you may need to check the condition of the connectors.


Posted on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Peugeot 504
How to Change the Engine Oil and Oil Filter on a Peugeot 504
Peugeot Peugeot Various Here are the instructions to perform routine maintenance by changing the engine oil and oil filter on a Peugeot 504. First, lift the vehicle and begi…
How to replace the third brake light bulb on the Peugeot
How to replace the third brake light bulb on the Peugeot
Peugeot Peugeot Various Today we will explain how to replace the third brake light on a Peugeot vehicle. To perform this operation, we need to open the trunk of the car and …
How to Recline the Rear Seats of the New Peugeot
How to Recline the Rear Seats of the New Peugeot
Peugeot Peugeot Various Reclining the rear seats of the new Peugeot is a very simple and quick operation that you can do yourself, thanks to our short video tutorial. To per…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos